.BR

🇧🇷 TLD characteristics

Back to top

👥 Contact requirements

Back to top

🛠️ Create

1

Create a contact with the registrant’s contact data. For a detailed description on how to create a contact, See the ➤ Create a new contact KB-article.

ℹ️ If you already have an existing registrant contact that you want to use for the create, you can skip this step and continue with step 2.

2

Add the required contact properties for .BR to the registrant contact. For a detailed description, See the ➤ Contact properties KB-article.

ℹ️ If the required contact properties are already added to the registrant contact, you can skip this step and continue with step 3.

3

Request the create through our portal. For a detailed description on requesting a create, See the ➤ Create domain(s) KB-article.

4

Depending on whether the registrant contact already holds contact validation or not, the domain will created with an OK or Pending Validation status:

• Registrant contact already validated
  ✅ The create completes with domain status OK.
• Registrant contact not validated
  ✅ The create completes with domain status PENDING_VALIDATION. The registrant must complete contact validation through email.
  For instructions, See the ➤ Contact validation KB-article.
  ⚠️  If contact validation is not completed, the domain status remains Pending Validation and does not resolve.

5

After completion, the registry may start a registrant verification procedure if the registrant data cannot be verified by the registry during spot checks.

ℹ️ For more information, go to ✅ Registrant verification.

Back to top

🏠 Create using Local Contact

1

Create a contact with the registrant’s contact data. For a detailed description on how to create a contact, See the ➤ Create a new contact KB-article.

ℹ️ If you already have an existing registrant contact that you want to use for the create, you can skip this step and continue with step 2.

2

Request the create through our portal. For a detailed description on requesting a create, See the ➤ Create domain(s) KB-article.

3

Once requested, the create remains pending while our Local Contact authority reviews the request. Clearance can take up to 7 days.

4

The projected create completion time when using Local Contact is 14 days.

5

Once the Local Contact authority has cleared the request, the create follows the registrant contact validation state:

• Registrant contact already validated
  ✅ The create completes with domain status OK.
• Registrant contact not validated
  ✅ The create completes with domain status PENDING_VALIDATION. The registrant must complete contact validation through email.
  For instructions, See the ➤ Contact validation KB-article.
  ⚠️  If contact validation is not completed, the domain status remains Pending Validation and does not resolve.

Back to top

🔁 Transfer in

1

Create a contact with the registrant’s contact data. For a detailed description on how to create a contact, See the ➤ Create a new contact KB-article.

ℹ️ If you already have an existing registrant contact that you want to use for the transfer, you can skip this step and continue with step 2.

2

Add the required contact properties for .BR to the registrant contact. For a detailed description, See the ➤ Contact properties KB-article.

ℹ️ If the required contact properties are already added to the registrant contact, you can skip this step and continue with step 3.

3

Request the transfer through our portal. For a detailed description on requesting a transfer, See the ➤ Transfer domain(s) KB-article.

4

If the registrant contact is not validated, the request cannot be sent to the registry and remains suspended until contact validation is completed.

• Registrant contact already validated
  ✅ proceed to step 5.
• Registrant contact not validated
  ⚠️ The registrant must complete contact validation through email.
  For instructions, See the ➤ Contact validation KB-article.
  ❌ If contact validation is not completed within 15 days, the request will fail.

5

Once all requirements above have been met, The current holder must now initiate a transfer at https://registro.br/login/. Our support department will contact you with instructions through email to initiate the transfer at registry level.

6

Once all requirements above have been met, the transfer is completed.

🔓 No transfer lock is applied after transfer completion.
🟰 During the transfer the expiry date does not change.

7

After completion, the registry may start a registrant verification procedure if the registrant data cannot be verified by the registry during spot checks.

ℹ️ For more information, go to ✅ Registrant verification.

Back to top

🏠 Transfer in using Local Contact

1

Create a contact with the registrant’s contact data. For a detailed description on how to create a contact, See the ➤ Create a new contact KB-article.

ℹ️ If you already have an existing registrant contact that you want to use for the transfer, you can skip this step and continue with step 2.

2

Request the transfer through our portal. For a detailed description on requesting a transfer, See the ➤ Transfer domain(s) KB-article.

3

If the registrant contact is not validated, the request cannot be sent to the registry and remains suspended until contact validation is completed.

• Registrant contact already validated
  ✅ proceed to step 4.
• Registrant contact not validated
  ⚠️ The registrant must complete contact validation through email.
  For instructions, See the ➤ Contact validation KB-article.
  ❌ If contact validation is not completed within 15 days, the request will fail.

4

Once requested, the transfer remains pending while our Local Contact authority reviews the request. Clearance can take up to 7 days.

⚠️ Additional action at the registry by the current registrar might be required to complete the transfer under our local contact service. If this is required, our support department will contact you through email with instructions.

5

The projected transfer completion time when using Local Contact is 14 days.

6

Once all requirements above have been met and the Local Contact authority has cleared the request, the transfer is completed.

🔓 No transfer lock is applied after transfer completion.
🟰 During the transfer the expiry date does not change.

Back to top

♻️ Renew

1

To request a renewal, See the ➤ Renew domains KB-article.

Back to top

🕒 Restore

1

To request a restore, See the ➤ Restore domain KB-article.

Back to top

🧾 Registrant change

1

Create a contact with the new registrant’s contact data. For a detailed description on how to create a contact, See the ➤ Create a new contact KB-article.

ℹ️ If you already have an existing contact that you want to use as the new registrant, you can skip this step and continue with step 2.

2

Add the required contact properties for .BR to the registrant contact. For a detailed description, See the ➤ Contact properties KB-article.

ℹ️ If the required contact properties are already added to the registrant contact, you can skip this step and continue with step 3.

3

Request a domain update to the new registrant contact. For a detailed description on how to start the domain update process, See the ➤ Update domain(s) KB-article.

4

If the registrant contact is not validated, the request cannot be sent to the registry and remains suspended until contact validation is completed.

• Registrant contact already validated
  ✅ proceed to step 5.
• Registrant contact not validated
  ⚠️ The registrant must complete contact validation through email.
  For instructions, See the ➤ Contact validation KB-article.
  ❌ If contact validation is not completed within 15 days, the request will fail.

5

Once all requirements above have been met, the registrant change is completed.

🔓 No transfer lock is applied after transfer completion.

6

After completion, the registry may start a registrant verification procedure if the registrant data cannot be verified by the registry during spot checks.

ℹ️ For more information, go to ✅ Registrant verification.

Back to top

🏠 Registrant change using Local Contact

1

Create a contact with the new registrant’s contact data. For a detailed description on how to create a contact, See the ➤ Create a new contact KB-article.

ℹ️ If you already have an existing contact that you want to use as the new registrant, you can skip this step and continue with step 2.

2

Request a domain update to the new registrant contact. For a detailed description on how to start the domain update process, See the ➤ Update domain(s) KB-article.

3

If the new registrant contact is not validated, the request cannot be sent to the registry and remains suspended until contact validation is completed.

• New registrant contact already validated
  ✅ proceed to step 4.
• New registrant contact not validated
  ⚠️ The new registrant must complete contact validation through email.
  For instructions, See the ➤ Contact validation KB-article.
  ❌ If contact validation is not completed within 15 days, the request will fail.

4

Once requested, the registrant change remains pending while our Local Contact authority reviews the request. Clearance can take up to 7 days.

⚠️ Additional action at the registry by the current registrar might be required to complete the transfer under our local contact service. If this is required, our support department will contact you through email with instructions.

5

The projected registrant-change completion time when using Local Contact is 14 days.

6

Once all requirements above have been met and the Local Contact authority has cleared the request, the registrant change is completed.

🔓 No transfer lock is applied after transfer completion.

Back to top

🚮 Delete

1

To request a delete, follow the instructions in the ➤ Delete domain KB-article.

Back to top

📤 Transfer out

1

Make sure no server or client transfer prohibited status is active for the domain to be transferred.

2

To start the outgoing transfer, contact the gaining registrar for information on their incoming transfer procedure.

Back to top

⚙️ Contact properties

1

Text here

Back to top

✅ Registrant verification

1

In some cases, the registry might ask for post verification of registrant data, if this occurs our support department will contact you through email.

Back to top

✅ Eligibility & Allocation requirements

1

Registrants need to provide a valid Brazilian CPF or CNPJ.number (add contact properties) and have a Local address in Brazil, otherwise local contact service can be used.

Back to top