.DK

TLD metadata	Overview of the most important TLD-metadata for the .DK ccTLD

Create	Instructions on the registration procedure for .DK through our portal

Transfer in	Instructions on requesting transfers for .DK to Realtime Register

Registrant change	Instructions on a registrant change for .DK through our portal

Transfer out	Instructions on how to transfer out .DK domains to another registrar

Add properties	Instructions on adding contact properties for the .DK ccTLD to a contact

TLD metadata .DK

Create

1: Create a contact with the registrant contact data in it. For instructions on how to create a contact, go to the Create a new contact knowledgebase article.

Add contact properties for .DK (DKhostmaster) to the Registrant contact. For instructions on adding contact properties for .DK to a contact, go to the Add properties section of this knowledge base article.

3: Request the create through our portal. For instructions on the create process, go to the Create domain(s) knowledge base article.

4: Once requested, the registrant will receive an email to enter into agreement with Punktum dk, the Danish domain registry. Once the registrant accepts the terms, the create will be requested with the registry and completed real-time.

Once the create has been completed, the registrant will most likely have to complete the ID-check if requested by Punktum. For more information on the ID-check, you can refer to the registry website. If you have run into any issues during the Punktum ID check, please contact our support department through support@realtimeregister.com.

Transfer in

Important

To transfer in a .DK domain to Realtime Register, you need an authcode. Authcode management can differ per registrar. An authcode can either be requested with the current registrar or retrieved by logging in to the Punktum self service portal.

For more information on retreiving authcodes from the self service portal go to the authcode generation for incoming transfers section of this Knowledge Base article.

1: Create a contact with the registrant contact data in it. For instructions on how to create a contact, go to the Create a new contact knowledgebase article.

3: Make sure you're in posession of a valid authcode and request the transfer through our portal. For instructions on the transfer process, go to the Transfer domain(s) knowledge base article.

4: Once requested, the transfer will complete real-time.

Important

Autohandle registrant contact upon transfer completion

Please note that incoming transfers for .DK are completed with an autohandle registrant contact with the registrant data as it was known with the losing registrar. This protects registrants from Punktum invoked domain suspension as trades during transfers might trigger an ID check by Punktum. If the registrant misses the ID check, domains are suspended by Punktum and domain resolution in DNS ceases to function.

Once the transfer has been completed, a registrant change to a new registrant can be performed through a registrant change.

Registrant change

1: Create a contact with the registrant contact data in it. For instructions on how to create a contact, go to the Create a new contact knowledgebase article.

2: Add contact properties for .DK (DKhostmaster) to the Registrant contact. For instructions on adding contact properties for .DK to a contact, go to the Add properties section of this knowledge base article.

Open the domain detail page of the domain you wish to request a regsitrant change for and request the update to the new registrant contact. For instructions on how to start the domain update process, go the Update domain(s) knowledge base article.

4: Once requested, the current registrant will receive an email from Punktum on the registrant email address to accept the registrant change

5: Once accepted, both the losing registrant and gaining registrant will receive a confirmation email from Punktum indicating the registrant change was successfull.

Important

Please note that following a registrant change, Punktum might invoke an ID-check on the new registrant contact. For more information on the Punktum ID-check, you can refer to the registry website. If you have run into any issues during the Punktum ID check, please contact our support department through support@realtimeregister.com.

Transfer out

To transfer out a .DK domain, you're going to need an authcode.

1: To obtain the authcode through our portal, login to the portal, go to the domain overview and lookup the domain you want to retrieve the authcode for. Please note that if an authcode is not available on the domain detail page, an option is provided to generate an

2: Provide the authcode to the registrant and have him/her request the transfer with his/her new registrar.

Add Contact properties

To add contact properties for .DK (DKhostmaster) to a contact, go to the Contact properties knowledge base article and follow the instructions up until step #2. Once you've selected the .DK contact properties option, the below options will show up on screen;

Submit the data as requested on the form and click save properties when you're done.

1: Entity type In this field, the registrant entity type is defined (for organisations only).

2: EAN (eanno) Here, the EAN number has to be defined for (public organisations only).

3: CVR (VAT number) (vatno) In this field, a valid VAT number has to be defined (for companies, public organisations & associations only).

4: Order confirmation token In this optional field, the then order confirmation token can be provided, this is an optional field and can be used to flag a contact as already having accepted the Punktum terms and conditions.

5: You've now successfully added additional properties for .DK (DKhostmaster) domains to a contact.