Adding an SRV-record to a DNS-template/DNS-zone
When creating/updating a DNS-template/DNS zone and you need to add/update an SRV-record, use the below instruction for adding/updating the SRV-record in the correct format to/for the relevant DNS-template/DNS-zone that is to be created/updated.
1
To add/update an SRV-record, make sure the SRV-record type is selected from the list of available records
2
Submit the host label for the SRV-record in the name field and hardware information in the content field. In case you wish to set a different TTL than specified in the SOA-record, submit a custom TTL for the SRV-record as well. Last but not least, define a Priority for the SRV-record if applicable
Important
The SRV record name & content should be submitted as below
Example format of an SRV record
| Name |
Weight |
Port |
Target host |
| _sip._tcp |
5 |
5060 |
sipserver.example.com |
3
That's all there is to it for submitting a SRV-record in the correct format using the various Realtime Register DNS services that are available in our portal
